Sweepers - ZM28H

ZM28H Description

The Pronar ZM-28H sweeper – is used for cleaning the surface of roads, pavements and squares. It can be also used for technological cleaning of the substrate before laying the asphalt layer. The working element of this machine is a cylindrical brush with a horizontal axis of rotation, driven by a hydraulic motor built inside the shaft. The working width of the brush is 2.8 m. The working brush consists of rings applied to a metal shaft. As the brush is worn out, it is possible to lower it by adjusting the support wheels. The garbage or snow discharge is limited by a front cover with a stepweis adjustable height. Operating the machine from the desktop in the operator’s cab simplifies the work being done. Sweeper Pronar ZM-28H is a machine mounted on the front of the carrier (agricultural tractor, wheel loaders, specialized vehicles), equipped with a lifting device, e.g. 3-point hitch.

Machinery Features

  • Lightweight Design
  • Solid Construction
  • Universal
  • Fucntional

  • Follow us on social media!

More Photos


Technical Data


Mounting Method Cat II three-point hitch – Swing -
Brush Drive Hydraulic Engine -
Working Width (Angle +25 or -25 degrees) 2600 mm
Max Oil 21 MPa
Electric Power Supply 12 V
Nominal Oil Pump Capacity 25-55 l/min
Brush Recommended Speed 100-150 RPM
Brush Max Speed 200 RPM
Brush Diameter 650 mm
Recommended Working Speed 6 KM/H
Weight 478 kg
Diemnsions (L x W x H) 1360/2998/1180 mm


For further information.


E-mail us and we'll aim to get back to you within 24 hours.

Gisburn, Lancashire

01200 411415

[email protected]